DIY Canvas Kit Tutorial - Coasters with a basket

Welcome βœ¨πŸ’›

Β 

Before you begin, pour yourself your favorite drink πŸ₯€β˜•, press play on your favorite vibe music 🎢, and settle into this moment.


This is your time 🌿🧡✨


Β 

------

This tutorial covers all "four coasters and the basket" style. We recommend reviewing the steps entirely before you begin making.

Β 

1. Cut your canvas

Take out the canvas and follow the outline to carefully cut out the shape. You may want to use a pen to draw the cut line first.


2. Divide and cut your yarn

Follow the pattern page provided to divide your yarn colors.

Cut your yarn to 18-22 inches.


3. Thread your needle

Our needles have large eyes and should be easy to thread.

We also included aΒ needle threader if you need it.


4. Start stitching

Start from the top left corner from one of the coaster patterns. Bring your needle up through the first square of the second row, and bring it down through the second square of the first row.

Leave about 2–3 inches at the end.

You just made a half stitch.


Next, bring the needle up through the second square of the second row, and bring it down through the third square of the first row.

This time, make sure the 2–3 inch tail is tucked in the back.

Continue stitching by following the pattern.


Β 

Β 

5. Finish the stitch

When you are almost out of yarn, leave 4-6 inches at the end.

Flip your canvas over andΒ tuck the extra yarn under the nearest 3–4 stitches. Trim the excess.


Β 

6. Complete the canvas

Follow the pattern to stitch all the half stitches.

Β 

7. Make the basket

Stitch the basket. You need to complete 5 pieces. Simply follow the pattern. This time you will see half stitches with a longer length.

Instead of going across just one square like a regular half stitch, you will go over two or more squares to create a longer diagonal line. The stitch is still tilted, just extended.

The longer stitch is called gobelin stitch. Basically it is the half stitch's cousin.

Β 

8. Connect the basket

Identify each pieces below. We will connect AA to GG lines together to form a basket by using overcast stitch.

Start from placing AA back to back with the finished sides facing out.

Thread 12–15 inches of the basket colored yarn.

Bring the needle up from one edge square.

Sandwich a 1-inch tail in the middle. Go over the same square but this time both side. You just made an overcast stitch.

Continue bringing the needle up through each next square until you finish the edge. Make sure to go over the edge square 3 times to secure.Β 

Use the same method to tuck in the thread. Connect all the sides.

9. Finish the basket

Overcast the rest of the edges after you finish making the basket (you should have 4 sides left)

10. Backing

Cut the backing material to shape (you can outline it with a Sharpie first), making it slightly smaller than the coaster. Peel off the glossy protective layer and press the sticky side firmly onto the back of your coaster.

(The inside of the basket is optional )

Β 

Β 

------

Β 

Helpful tips:

  • When you are about to finish, make the last 2–3 stitches slightly loose. This way, when you thread back, the stitch will go through smoothly.
  • Once you've finished your design, if the surface looks fuzzy, use your scissors to carefully trim it (being very careful not to cut the actual yarn).Β 
  • If you still have questions, please Email us love(at)Mellorie.com

Β 

------

*Basket Pattern(3 bigger ones and 2 smaller ones):