------
1. Cut your canvas
Take out the canvas and follow the cut line to carefully cut the shape. Make sure you cut 2 identical pieces(use the pen to outline if needed).
2. Cut your yarn
Cut your yarn into lengths of 18–22 inches.
3. Thread your needle
Our needles have large eyes and should be easy to thread.
We have also included a needle threader if you need it.
4. Start stitching
Start from the top left corner. Bring your needle up through the first square of the second row, and bring it down through the second square of the first row.
Leave about 2–3 inches at the end.
You just made a half stitch.
Next, bring the needle up through the second square of the second row, and bring it down through the third square of the first row.
This time, make sure the 2–3 inch tail is tucked in the back.
Continue stitching by following the pattern*.
5. Finish the stitch
When you are almost out of yarn, leave 2–3 inches at the end.
Flip your canvas over and tuck the extra yarn under the nearest 3–4 stitches. Trim the excess.
6. Complete 2 pieces
Follow the pattern to stitch the other side so you have 2 matching pieces.
7. Add words
Plan your words on your finished canvas.
Ensure the letters are at least 1 square away from the edge.
Thread the needle, bring it up one square away from your letters, string your letter beads, and bring the needle back down one square away from the end of your letters.
Secure each line with a double knot in the back.
8. Finish the edge
Thread your chunky yarn. Place both pieces back to back with the finished sides facing out.
Start from one side, bring the needle up through one end, sandwich the tail, and go through the same square again.
You have just made an overcast stitch. Continue using the overcast stitch to seal the edges.
When you are almost out of yarn, leave 2–3 inches at the end. Tuck the extra yarn under the nearest 3–4 stitches. Trim the excess.
9. Keyring:
Open the split ring(make sure you do not open from the side way to ruin the circular shape) and slide it through the square marked with a black dot (or anywhere you prefer). Then, attach the keyring.
Attach the heart charm and the clasp on to the keyring.
The ball chain is optional if you want to attach it to a wider strap.
------
Helpful tips:
-
When finishing a section, make the last 2–3 stitches slightly loose. This makes it easier to thread the yarn back through to tuck in the end. You can gently pull to tighten the yarn afterward.
- If you still have questions, please Email us love(at)Mellorie.com
------
* Complete pattern



